Metal Stencil Cleaner - SC-A22E

Brand: Sawa Corporation
Product Code: Metal Stencil Cleaner - SC-A22E
Specifications: SC_A22E.pdf
Availability: Inquiry Basket

Enviro-friendly, Superior type </td></td>
Effective for uses have several size of stencils.
Ultrasonic cleaningFlow fan dryingSee-through structure



Reduce burden of air in factory.
  • Equipped with cross-flow fans, CO2 emissions are drastically reduced(68% less conventional ratio)
  • Available to correspond leaded solder and Pb-free solder.
  • External output for optional Squeegee Cleaner
  • Digital timer for cleaning and drying time







Cleaning Effect



Model No. SC-A22E
Outside Dimension W 1100 D 790 H 1780mm (H:incl. Signal Tower : 2170㎜)
Weight 210kg
Power AC100-240V 50/60Hz
Power Consumption 450VA
Ultrasonic frequency 40kHz 
Ultrasonic output 300W
Input Air Supply 0.4MPa
Air Consumption 80NL/min(Peak)
Exhaust Air Wind 5m/sec
Applicable Stencil Size 550×600mm 550×650mm
736×736mm 580×800mm
Cleaning Time Approx. 1 minute - ※
Drying Time Approx. 4 minutes - ※
  • ※ Condition : Using recommended solvent; HA-1040U


Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: